How many shingles per square?
Three bundles. That is the short answer, and it is right for the great majority of asphalt roofs. The longer answer is about coverage, waste, ridge cap and the label on the bundle you actually bought.
The standard: three bundles per square
A roofing square is 100 sq ft of finished roof surface. GAF states that standard 3-tab and architectural asphalt shingles come three bundles to a square, so each bundle covers about 33.3 sq ft. That is the number the whole trade uses for estimating, and it is the number behind the bundle counts on every material list.
The exception is heavyweight architectural shingles. Some lines put less than 33.3 sq ft in a bundle, which means four bundles per square instead of three. The difference on a 30-square roof is 30 bundles, so it is worth checking the label rather than trusting the rule.
Coverage per bundle, in numbers
| Roof area | Bundles at 3/square | With 10% waste | Ridge cap bundles |
|---|---|---|---|
| 10 squares | 30 | 33 | 1 |
| 15 squares | 45 | 50 | 2 |
| 20 squares | 60 | 66 | 2 |
| 25 squares | 75 | 83 | 3 |
| 30 squares | 90 | 99 | 3 |
| 40 squares | 120 | 132 | 4 |
The ridge cap column assumes about 100 ft of ridge and hip at 25 ft per bundle. It is there to show that ridge cap is a real line item, not a rounding error: on a 30-square roof it is three bundles on top of the field count.
Why the bundle count and the square count disagree
A square is an area; a bundle is a package. The two only match at exactly three bundles per square. As soon as you add waste, the bundle count runs ahead of the square count, and as soon as you add ridge cap and starter, it runs further ahead. A homeowner who orders "one bundle per square" is short by two-thirds before the first cut.
The reverse mistake is just as common: a supplier quotes bundles with waste already included, the homeowner compares it with their own square count, and concludes the supplier is padding the order. Ask for the measured area and the waste percentage separately, and the two numbers will reconcile.
Waste is a roof-shape question
Ten percent is the usual allowance for a simple gable: two rectangular planes, a ridge and four rake cuts. A hip roof has four planes, four hips and a shorter ridge, so every course ends in a cut; 15% is the normal figure. A roof with dormers, a chimney, two valleys and a change in pitch can consume 20%, and a very cut-up roof more.
None of those percentages is a manufacturer's published number. They are planning allowances, and they are marked as house rules on the method page. The one thing that is certain is that zero waste is wrong on every roof.
Ridge cap and starter strip are separate
Ridge cap is a folded shingle that covers the ridge and hips. GAF Seal-A-Ridge covers about 25 linear feet per bundle, so 100 ft of ridge and hip is four bundles. Starter strip is a narrower strip along the eaves and rakes; GAF Pro-Start covers about 120.33 ft per bundle when split in half.
Both are sold in the same colour family as the field shingles and both come out of the same order. A complete order for a 15-square gable roof with 40 ft of ridge and 100 ft of perimeter is 50 field bundles, 2 ridge cap and 1 starter, for 53 in total.
What a square is not
- It is not the house footprint. A 1,200 sq ft ranch at 6:12 with 1 ft eaves has about 15 squares of roof.
- It is not a square shape. It is 100 sq ft in any shape, including the triangles at hips and valleys.
- It is not the same as 100 sq ft of bundle. Three bundles cover a square, but a bundle is a package with overlap and cut waste built into the installation, not the other way round.
- It is not a price. Roofing is priced per square, but the price depends on the material, the tear-off, the access and the region. This site does not publish prices.
Common roof sizes in squares
A small bungalow of 900 sq ft of footprint at 4:12 with 1 ft eaves is about 10.8 squares. A 1,500 sq ft ranch at 6:12 is about 18.6 squares. A 2,400 sq ft two-story colonial at 8:12, where the roof covers the footprint once, is about 16 squares. A 3,000 sq ft house with a garage wing and a 10:12 main roof can pass 25 squares.
Two-story houses are the ones people overestimate most, because the roof covers the footprint, not twice the floor area. A 2,400 sq ft colonial with 1,200 sq ft of footprint has a roof of roughly 1,300 to 1,600 sq ft, or 13 to 16 squares, not 24.
Ordering, delivery and storage
Shingles are heavy enough that a 50-bundle order arrives on a pallet, and the truck needs a flat approach. Bundles should be stored flat on a pallet, under cover, and not stacked more than the manufacturer allows, because a stack that leans in the sun takes a set that shows on the roof.
Keep two spare bundles. Repairs from the same dye lot are invisible; repairs from a later lot are not. A spare bundle costs less than the smallest available repair order in five years.
Check the slope and the deck first
Shingles are permitted at 2:12 and above, with double underlayment from 2:12 to 4:12. If your pitch is under 4:12, read the underlayment page before ordering, because the roll count doubles. And if the deck is soft, no shingle order will fix it.
Frequently asked
How many bundles are in a square?
Three bundles for standard 3-tab and most architectural shingles. Each bundle covers about 33.3 sq ft, and three of them make the 100 sq ft square.
How many square feet does one bundle cover?
About 33.3 sq ft at the standard 3-bundles-per-square rate. A heavyweight architectural product may cover slightly less, so read the label.
How many shingles are in a bundle?
It depends on the product. A 3-tab bundle holds more, thinner strips than an architectural bundle of the same coverage. The square footage on the label is the number that matters, not the piece count.
How much extra should I buy?
Ten percent for a simple gable and 15% for a hip roof or one with valleys. Buy the whole roof in one order so the shingles come from the same dye lot.
Is a square the same as 100 square feet of house?
No. A square is 100 sq ft of sloped roof surface. The house footprint is smaller, because the pitch adds surface and the eaves extend past the wall.
Where these numbers come from
- How Many Bundles of Shingles Are in a Square? — GAF, read Nov 20, 2026
- Seal-A-Ridge Ridge Cap Shingles sell sheet (RESHR112) — GAF, read Nov 20, 2026
- Pro-Start Starter Strip Shingles sell sheet (RESGN546) — GAF, read Nov 20, 2026
- 2021 International Residential Code, R905.2.2 Slope — International Code Council, read Nov 20, 2026
Figures that come from our own arithmetic rather than a published table are marked house rule on the method page. No price is shown anywhere on this site because no supplier publishes one national figure that would be true for your town and your roof.
Use the calculator: shingle bundles · roof squares · pitch chart · underlayment