Roof square calculator
From the dimensions of the house to the number of squares on the roof: eaves included, slope corrected, waste separated from the real area so you can see both.
Default scenario: 40 × 30 ft footprint, 6:12 pitch, 1 ft eave on all sides, 10% waste. Change a field and recalculate for your roof.
Your result
15.03 squares
1,503 sq ft of roof surface at 6:12, before waste
| Footprint including eaves | 1,344 sq ft | (40 + 2 × 1) × (30 + 2 × 1) |
| Pitch multiplier | 1.118 | √(144 + 6²) ÷ 12 |
| Roof surface area | 1,503 sq ft | Footprint × multiplier |
| Roofing squares | 15.03 | One square = 100 sq ft |
| Squares with 10% waste | 16.53 | What to order, not what to cover |
| Shingle bundles at 3 per square | 50 | A starting point; the shingle page adds ridge and starter |
- The multiplier accounts for the extra surface hidden in the slope: a steeper roof has more shingles than its footprint.
- Eaves are counted on all four sides because the roof extends past the wall on every side.
Other options
- Measure along the slope instead — If you can safely measure the rafter length and the ridge-to-eave width, multiply those two and skip the pitch multiplier.
Why roofers count in squares
A roofing square is 100 sq ft of finished roof surface. It is not a metric unit and it is not a square shape; it is a billing and coverage unit that every shingle, underlayment and vent manufacturer uses. Three bundles of asphalt shingles cover one square, a roll of synthetic underlayment covers ten, and a roof is priced by the square. Once you have squares, every other quantity on this site follows.
The catch is that a square is measured on the slope, not on the plan. A house that covers 1,200 sq ft of ground does not have 12 squares of roof; it has more, because the roof is longer than the ground it covers and because the slope stretches every dimension.
The three corrections this calculator makes
1. The eaves
The roof extends past the wall on all four sides. A 40 × 30 ft house with a 1 ft overhang has a roof footprint of 42 × 32 ft, not 40 × 30. That is 1,344 sq ft instead of 1,200, a difference of 1.44 squares before the slope is even applied. On a house with 2 ft eaves the gap is larger, and on a house with no eaves at all the footprint and the wall line are the same.
2. The slope
Multiply the footprint by the pitch multiplier. For a rise of r inches per 12, the multiplier is √(144 + r²) ÷ 12. At 6:12 it is 1.118; at 4:12 it is 1.054; at 10:12 it is 1.302. The multiplier never goes below 1, because a sloped roof always has more surface than the plan it covers.
3. The waste
Waste is not part of the roof. It is the material you buy and do not install: rake cuts, valley cuts, the last course at the ridge, and the bundle that gets damaged. Keeping it as a separate row means you can compare your roof area with a supplier's takeoff without arguing about whether their total included waste.
A worked example, line by line
Take a 40 × 30 ft house with 1 ft eaves at 6:12 and 10% waste.
- Footprint including eaves: (40 + 2) × (30 + 2) = 42 × 32 = 1,344 sq ft.
- Pitch multiplier at 6:12: √(144 + 36) ÷ 12 = 1.118.
- Roof surface: 1,344 × 1.118 = 1,503 sq ft.
- Squares: 1,503 ÷ 100 = 15.03.
- With 10% waste: 16.53 squares.
- Field shingles at 3 bundles per square: 49.6, so 50 bundles.
The number to carry into a shingle order is 16.53 squares, not 15.03. The number to compare with a roofer's measurement is 15.03, because that is the actual roof.
Complex roofs: add the planes
A rectangular footprint is the easy case. An L-shaped house, a cross-gable or a house with a garage attached at an angle is several rectangles. Measure each one, apply the same pitch to each (or its own pitch if the planes differ), and add the squares. Do not average two pitches: a 4:12 porch and a 10:12 main roof average to 7:12, which describes neither plane and gets both areas wrong.
Hips and valleys do not change the surface area much, but they change the waste. That is why the calculator suggests 15% for a hip roof and 10% for a gable.
When to measure along the slope instead
If you can safely reach the roof, measuring along the slope is more accurate than any footprint calculation. Measure the length of the ridge and the length of the rake, then the distance from eave to ridge along the surface. A simple gable is ridge length × slope width × 2. That method already includes the pitch, so it needs no multiplier; add only the waste.
The footprint method exists for the far more common case: you are standing on the ground with a tape and a ladder you do not want to climb. It is accurate to within a few percent as long as the building is rectangular and the pitch is measured, not guessed.
What the number does not include
- A second roof layer. Tear-off and re-cover are different jobs; the squares are the same but the disposal and the underlayment are not.
- Dormers and bay windows. They are separate planes with their own waste. Add them individually.
- Garages and porches. If they share the roof they are in the footprint; if they have their own roof, measure them separately.
- Ice-dam membrane. It covers the eaves only and is bought by the linear foot, not by the square.
Checking a supplier’s takeoff
A supplier will usually quote squares with waste already added and may round up to the next bundle. Ask for the measured area, the waste percentage and the bundle count separately. If their measured area is more than a few percent above yours on a simple gable, one of you has measured a different roof: a garage, a porch, or the old layer that is still on the deck.
Frequently asked
How many square feet is a roofing square?
One square is 100 sq ft of finished roof surface. A 10 × 10 ft area is one square, and a 40 × 30 ft house at 6:12 is about 15 squares before waste.
Do I measure the footprint or the roof surface?
Measure the footprint and give the pitch. The calculator adds the eave overhang and applies the pitch multiplier, which is the safe way to get surface area without walking the roof.
How much waste should I add for shingles?
Ten percent on a simple gable roof and 15% on a hip roof or one with several valleys. Waste covers rake cuts, valley cuts and the damaged bundle at the bottom of the stack.
Does a 6:12 roof really add 12% to the footprint?
It adds 11.8%. The multiplier is √(144 + 36) ÷ 12 = 1.118, so 1,344 sq ft of footprint becomes 1,503 sq ft of roof surface.
Why is my roofer’s square count higher than mine?
They usually measured along the slope, added for valleys and starter, or included a detached garage. Ask which planes are in their number and compare the footprint, not the total.
Where these numbers come from
- How Many Bundles of Shingles Are in a Square? — GAF, read Nov 20, 2026
- Roof Pitch Multiplier: Calculator, Table & Guide — Roof Observations (Jack Gray, RRO), read Nov 20, 2026
- 2021 International Residential Code, R905.2.2 Slope — International Code Council, read Nov 20, 2026
Figures that come from our own arithmetic rather than a published table are marked house rule on the method page. No price is shown anywhere on this site because no supplier publishes one national figure that would be true for your town and your roof.
Next: shingle bundles · roof pitch · sheathing panels · how many shingles per square